HyperMotion TRAMPOLINE HYP 54 IN Manual Del Usuario página 30

29
(c) Now let's move to the installation of the next three bungee cords. Each of them should
be in the middle of every two bungee cords that have been installed before.
Tip 1. Use the Bungee Cord Loading Tool (#12).
Tip 2. Always install another bungee cord in the opposite position after the one
has been installed so that the tension can averagely distribute.
Tip 3. Don't install the bungee cords side by side, or you'll find it's hard and even
unable to finish in the end.
1
STEP 3 - FRAME PAD ASSEMBLY
There are two steps listed as (a) and (b).
(a) Place the Pad (#2) on the frame. Please align all the holes on the mat with the holes
on the frame.
2
hole
#2
hole
3
hole