HyperMotion TRAMPOLINE HYP 54 IN Manual Del Usuario página 28

27
STEP 2 - ATTACH THE MAT WITH ENCLOSURE NET TO THE FRAME
Please check all the three steps listed as (a), (b), and (c).
(a) Please find the three blue rings on the mat. Attach them to the three preformed holes
on the frame (see the diagram as shown below) with three Bungee Cords (#6).
IMPORTANT
(b) Adjust the position of the bungee balls to make them close to the edge of the mat
rather than the frame so that the bungee cord will not break or get loose when jumping.
• Please ensure the bungee cords do NOT cover the holes.
• All the bungee balls should face downward.
hole
blue ring