HyperMotion TRAMPOLINE HYP 54 IN Manual Del Usuario página 27

Assembly Steps
Unpack the carton,remove the packing material and place all parts on the floor carefully,then
check each parts as manual part list first. It's easy. There are six steps in total.
STEP 1 – FRAME ASSEMBLY
There are some diff ierence assembling the frame of the 54-inch trampolines and the 66-inch
trampolines although the layout looks the same. Refer to the following diagrams for each
size accordingly.
Frame Layout for the 54-inch & 66-inch Trampolines
# 4
The frame assembly steps for the 66-inch trampolines. Important: You should
use the Screw Set-2 (#14) and Screw Driver Set (#13).
#4
#4
#4
Total:
6 Pieces
#4
#4
#4
The frame assembly steps for the 54-inch
# 4
trampoline. Connect the Frame Tube (#4)
using spring clips one by one.
EN 26