GARDY SHELTER 3365 Instrucciones De Instalación página 30

ENGLISH
ITEM DESCRIPTION
A Front bottom beam
B Rear bottom beam
H1 Half side beam
Start construction with the 4 lower planks: the two lower front/rear planks (parts A, B) and
the first two side planks (parts H1), with the plank lugs facing upwards.
Assemble them to form a base frame.
To install the planks, it's best to use a rubber hammer and, above all, an assembly aid. Place
the wedge on the tongue of the plank and tap with the hammer until the plank is driven in all
the way.
The concrete slab must be perfectly straight. Check this using the spirit level.
DIMENSIONS (MM)
28 x 95 x 2980 mm
28 x 95 x 2980 mm
28 x 48 x 2980 mm
30
QTY
1
20
2