GARDY SHELTER 3365 Instrucciones De Instalación página 38

ENGLISH
ITEM DESCRIPTION
M Bitumen felt
P Bitumen felt fixing batten
Q Fixing batten under battens
Lay the bitumen roofing felt (part M). Handle it carefully (preferably with gloves) to avoid
tearing it. First cover the 2 ends (front and back) and work towards the middle of the roof,
making sure to overlap each strip already laid. Then nail the fixing battens (pieces P) to
the edges of the strips, using SC1 screws. Fix the battens under the battens (Q pieces),
using SC1 screws, by folding the felt under the battens - see detail drawing. This operation
prevents the felt from tearing and provides a good underlay for the roof waterproofing.
⑨
FITTING THE FINISHING PIECES
R
N
ITEM DESCRIPTION
N Perimeter board
R Diamond finish
Continue by fitting the front and rear fascia boards (pieces N) and the rhombus trims (pieces
R), using SC2 screws.
DIMENSIONS (MM)
40 x 15 x 1600 mm
40 x 15 x 1610 mm
N
DIMENSIONS (MM)
20 x 95 x 1620 mm
20 x 110 x 200 mm
38
Strips 3,3 m
R
N
QTY
4
8
4
QTY
4
2