2.5 SPEAKER VOLUME ADJUSTMENT
Volumes are calibrated by default so not to require adjustments in most cases.
Use a screwdriver to adjust the speaker volume, if required (see item 14 in paragraph 2.1 - DESCRIPTION
OF COMPONENTS).
3
TECHNICAL SPECIFICATIONS
Power voltage: .............................................................................................................................36 to 48 V
Consumption: maximum .................................................................................................. 130 mA @ 48 Vdc
standby........................................................................................................ 20 mA @ 48 Vdc
Maximum working power: ............................................................................................................ max. 6.5 W
Dimensions (WxHxD): ....................................................................................................... 100 x 180 x 28 mm
Name tag dimensions: ...........................................................................................................48.5 x 15.5 mm
Tag and button light: .................................................................................................................. White LEDs
Degree of protection of casings: ............................................................................................................. IP55
Degree of protection from mechanical shocks: .......................................................................................IK07
Working temperature range: ..................................................................................................... -10 to +50° C
Max. humidity: .................................................................................................................................. 95% RH
N.O. dry contact maximum current (OP3): ............................................................................... 1 A @ 30 Vdc
Transmitting capsule: ....................................................................................................electret microphone
Receiving capsule: .........................................................................................16 Ω water-resistant speaker
Frequency band: .............................................................................................................................13,56 MHz
Output power (Max): .........................................................................................................-13 dBμA/m @ 10m
Wires with cross-section area of 0.5 mm² or larger must comply with IEC 60332-1-2; wires with
cross-section area smaller than 0.5 mm² must comply with IEC 60332-2-2.
4
KEY TO SYMBOLS
Symbol
5
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, URMET S.p.A. declares that the radio equipment types:
ONE- AND TWO-FAMILY SECONDARY PANEL
(Ref. 1723/11 and 1723/12) are in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
www.urmet.com
DS1723-003B
Description
Direct input voltage
See the installation manual of the device
13