en-us Environmental protection and energy-saving
2 Environmental
Environmental protection and energy-saving
protection and
energy-saving
Environmental protection and energy-saving
2.1 Disposal of packaging
The packaging materials are
environmentally compatible and
can be recycled.
Sort the individual components
▶
by type and dispose of them
separately.
3 Before the first use
Before the first use
In order to be able to use the
Before the first use
cooking functions, you must pair
the wireless cooking sensor to the
control panel. You can find further
information in the section on
cooking functions in the user
manual for your hob.
3.1 Included in delivery
After unpacking all of the parts,
check for any transport damage
and for completeness of delivery.
Wireless cooking sensor
¡
Silicone patch
¡
Template
¡
6
3.2 Attaching the silicone
patch
The silicone patch secures the
cooking sensor to the cookware.
For fitting on the cookware:
The adhesive area on the
1.
cookware must be free from
grease. Clean the cookware,
dry it thoroughly and wipe the
area where the patch is to be
adhered using alcohol, for
example.
Remove the protective film from
2.
the silicone patch. Adhere the
silicone patch to the outside of
the cookware in the correct
place using the enclosed
template as a guide.
Press down all over the surface
3.
of the silicone patch, including
in the center.
Leave the adhesive to dry for
4.
one hour. Do not use or rinse
out the cookware during this
time.
Note: If the silicone patch comes
loose, use a new one. If required,
you can purchase a set with five
silicone patches from specialist
retailers, from our customer