Publicidad
Idiomas disponibles
Idiomas disponibles
service or on our official website
www.thermador.com by quoting
the article number 17007119.
All adhesives break down over
time when they are stored. To
prevent this, place the silicone
bases on the relevant cookware
as soon as you get them.
3.3 Attaching the wireless
cooking sensor
Ensure that the silicone patch
1.
is completely dry before
attaching the cooking sensor.
Place the cooking sensor
2.
squarely onto the silicone
patch.
Replacing the battery en-us
4 Replacing the
Replacing the battery
battery
If the LED on the wireless cooking
Replacing the battery
sensor does not light up when
pressed, the battery is flat.
Replacing the battery:
Remove the silicone cover from
1.
the lower section of the cooking
sensor casing and remove both
screws using a screwdriver.
Open the cooking sensor cap
2.
and remove the battery from
the base.
!
7
Publicidad
