Publicidad
6.
Display
Description of the error
The robot is unable to locate its
1032
docking station
The robot will turn off due to low
2001
battery power
The robot is no longer positioned
2010
on the ground
2020
One of the robot's wheels is jammed
2021
The vacuuming motor is jammed
The power-brush is jammed/
2022
blocked
2024
The robot is unable to find its route
The robot has a problem with its
2025
fall sensors
The robot's dust collector is not
2030
attached
The robot's navigation sensors are
2040
damaged
2041
The robot's gyroscope is damaged
2050
The robot faced an issue
The robot does not turn on
Possible cause/solution
The docking station is not connected to the mains. Please connect the
base to the mains.
The docking station is not easily accessible due to the cluttered floor
space.
Ensure the robot has easy access by clearing any clutter around the
docking station.
The battery power is weak and the robot is not able to return to the
docking system. Return the robot manually to the docking station in
order for it to recharge.
The robot is not at ground-level.
Please place the robot on the ground.
One of the wheels is jammed and is not working properly.
Turn off the robot and remove the blocking element.
The robot is unable to properly turn on. Call the after-sales service
centre, quoting error code 2021.
The power-brush is not working correctly.
Turn off the robot and remove the blocking element.
Remember to clean the power-brush using the tool provided to
remove hair.
The robot is blocked.
Move the robot, repositioning it in an uncluttered space and re-start
the vacuuming. Move the robot.
The fall sensors are dirty. Clean the fall sensors with the cloth provided.
The robot is jammed at the top of the stairs. Move the robot.
The robot cannot start without its dust collector.
Attach the dust collector and its filter properly.
Place the dust collector and filter inside the appliance.
The robot is unable to properly turn on. Call the after-sales service
centre, quoting error code 2040.
The robot is unable to properly turn on. Call the after-sales service
centre, quoting error code 2041.
Switch off and switch on the robot and put it back on the docking
station. After booting, the robot will be ready for any command.
The robot does not have sufficient battery power to turn on.
Place the robot on the docking station; ensure the ON/OFF switch
under the robot is in the OFF position.
Set the switch to the ON position.
69
Publicidad
