LORCH ML Serie Instructivo De Servicio página 27

MIG/MAG welding torches ML/MW GRIP
1 Identification
2 Precautionary statements
MIG/MAG manual welding torches are used to safely weld low and high-
alloy materials. They consist of the torch neck with equipment parts and wear
parts, handle or handle tube and cable assembly with central connector. They
conform to EN 60 974-7 and are not considered devices that independently
fulfil functions. Arc welding can only be carried out in connection with a
welding power source.
These operating instructions only describe MIG/MAG ML/MW GRIP welding
torches. The MIG/MAG welding torches must only be operated using original
LORCH spare parts.
This section provides key information on the safe operation of the product.
Please read it carefully and make sure that all users are familiar with its contents
before using the system for the first time.
• Please read these operating instructions carefully before using the system
for the first time.
• These operating instructions provide you with all the information you need
for trouble-free and safe operation. The product has been developed and
manufactured in accordance with state-of-the-art technology and the
recognised safety standards and regulations.
• The operating instructions warn you against unavoidable residual hazards
for users, third parties, devices or other material property. The safety
instructions used, which must be adhered to, point out unavoidable design-
related residual hazards.
• Non-observance of these safety instructions may result in risks to the life or
health of personnel, environmental damage or material damage. The
product may only be operated in technically perfect condition in
compliance with the operating instructions.
• LORCH will accept no liability for damage caused by non-observance of
the operating instructions.
• Use suitable means to protect yourself and bystanders from the hazards
listed in the chapter on safety.
• Read and observe the operating instructions before carrying out specific
work such as commissioning, operation, transport and maintenance.
1 Identification
EN - 3