LORCH ML Serie Instructivo De Servicio página 49

MIG/MAG welding torches ML/MW GRIP
13.2 Consumables
13.3 Packaging
14 Warranty
Oil, greases and cleaning agents must not contaminate the ground or enter the
sewage system. These substances must be stored, transported and disposed of
in suitable containers. Please observe the relevant local regulations and
disposal instructions in the safety data sheets specified by the manufacturer of
the consumables. Contaminated cleaning tools (brushes, rags, etc.) must also
be disposed of in accordance with the information provided by the
consumables' manufacturer.
LORCH has reduced the transport packaging to the necessary minimum.
The ability to recycle packaging materials is always considered during their
selection.
This product is an original LORCH product.
LORCH Schweisstechnik GmbH guarantees correct manufacture and assumes
a plant production and function warranty for this product upon delivery in line
with current state-of-the-art technology and the regulations in force. If LORCH
is responsible for a defect that occurs, LORCH is obliged to remedy the defect
or deliver a replacement at its own cost and its own discretion. The warranty
covers manufacturing faults, but not damage resulting from natural wear and
tear, overloading or improper use. Liability claims will be rendered invalid if
spare parts or wear parts are used which are not original LORCH parts and if
the product has been repaired improperly by the user or a third party. Wear
parts are generally excluded from the warranty. In addition, LORCH is not
liable for damage caused by using our products. Questions about the warranty
and our services can be addressed to LORCH or our sales companies. Relevant
information can be found online at www.lorch.biz.
14 Warranty
EN - 25