Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
HAZARDS AND SAFETY PROVISIONS DURING INSTALLATION AND COMMISSION-
During appliance installation, commissioning, adjustment and part replacement procedures,
watch out for the following hazards and provide for the countermeasures indicated below:
► Source of hazard: Appliance mechanics
Hazard
Risk of crushing
parts of the body
in case of fall of the
appliance
Risk of cutting due
to sharp edges
Risk of crushing
parts of the body
in case of fall of the
appliance
NOTE: Only applies to electrical appliances.
► Source of hazard: Electric power
Hazard
Risk
of
electric
shock caused by
live components
6
ING, ADJUSTMENTS AND PART REPLACEMENT
Where or in which situations
does the hazard occur?
When the appliance is
lifted
When handling sheet-met-
al parts
In case of uneven or sloped
fl oors
Where or in which situations
does the hazard occur?
• Under protective panels
• Under the control panel
• Under protection covers
Countermeasures
• Pay attention to the centre
of gravity
• Avoid collisions
• Pay special care during this
activity
• Wear personal protective
equipment in accordance
with safety regulations
• Comply with the correct in-
stallation requirements as
per section "Installing the
appliance" on page 10 of
the installation manual.
Countermeasures
• Operations to the electric
system may be carried out
by authorised and qualifi ed
staff only, in accordance
with the relevant applica-
ble laws.
• Specialist procedure
• Comply with the correct in-
stallation requirements as
per section "Installing the
appliance" of the installa-
tion manual.
• Disable the power supply
before removing the pro-
tections
SAFETY
Safety device
None
None
None
Safety device
• P r o t e c t i o n
panels
• S y s t e m
s w i t c h - d i s -
connector
3395250_ut_GB
Publicidad
