Publicidad
Idiomas disponibles
Idiomas disponibles
Press the Menu button until,
"Mode: Normal Wash" is
displayed.
The "_"
symbol flashes.
The Start/Pause
indicator light
flashes (red).
[_lf
no buttons are pushed within 10
seconds the display will revert
back to normal "Ready". Changed
settings will be retained.
Press the Select button until the
desired washing mode is
displayed.
[_lf
"Power Wash: on" or "Quick
Wash: on" were selected, the
"%"or"
_
" symbol are
permanently displayed when the
menu is left.
You can select other settings by
pressing the Menu button and change
them by pressing the Select button.
Press the Start/Pause
button.
The program starts.
The indicator light is lit.
[_The
individual program steps are
indicated in the display field.
Pre-Soak
An integrated pre-soak cycle for
pre treatment of heavily stained items.
Turn the program selector to the
desired program.
Load the laundry and close the
door. The Start/Pause
indicator
light flashes (red).
Example:
Fq
Press the Menu button until
"Pre-Soak: off" is displayed.
The "_"
symbol flashes.
The Start/Pause
indicator light
flashes (red).
If no buttons are pushed within 10
seconds the display will revert
back to normal "Ready". Changed
settings will be retained.
Press the Select button until
"Pre-Soak: off" or "Pre-Soak: on"
is displayed.
[_lf
"Pre-Soak: on" was selected,
the "_"
symbol is permanently
displayed when the menu is left.
You can select other settings by
pressing the Menu button and change
them by pressing the Select button.
Press the Start/Pause
button.
The program starts.
The indicator light is lit red.
[_The
individual program steps are
indicated in the display field.
Signal
The acoustic signal indicates the start
or end of the program, operating errors
or malfunctions.
You can specify the volume of the
acoustic signal.
Activating,
specifying
the
signal volume
and
deactivating
the signal
Turn the program selector to the
desired program.
Load the laundry and close the
door.
The Start/Pause
indicator light
flashes (red).
Example:
Fq
Press the Menu button until
"Signal: off" is displayed.
The "u_,)" s ymbol flashes.
The Start/Pause
indicator light
flashes (red).
If no buttons are pushed within 10
seconds the display will revert
back to normal "Ready". Changed
settings will be retained.
Press the Select button until
"Signal: continuous" is displayed.
While holding down the Select
button the volume of the acoustic
signal will increase.
When the signal has reached the
required volume, release the
Select button.
Hold down the Select button after
10 seconds the display indicates
"Signal: max".
22
Publicidad
