KTM A59012955544 Instrucciones De Montaje página 53

Guideline
Tap compression
Info
When assembling, ensure that the tap compressions are not mixed up.
The red tap compression is installed on the right.
–
bn
Mount special tool on the piston rod.
Support tool (T14026S1)
Info
The special tool must be used to prevent the adjusting tube from being lifted and thus to prevent
oil from reaching the piston rod.
–
Clamp the fork leg vertically.
Guideline
Use soft jaws.
–
Fill with fork oil according to the setting list.
Info
Pull out the piston rod and push back in a number of times to bleed the cartridge.
M29x1 35 Nm (25.8 lbf ft)
ASSEMBLING THE FORK 5
505258-01
19