Publicidad
Idiomas disponibles
Idiomas disponibles
e)
Keep the product out of the reach of children.
f)
Repairs and maintenance should be carried out by qualified personnel using
only original spare parts. This will ensure the safety of use.
g)
To ensure the designed operational integrity of the device, do not remove
factory-installed covers or loosen screws.
h)
Do not leave the device switched on unattended.
i)
Clean the device regularly to prevent permanent dirt build-up.
j)
Use reinforced hoses for the compressed air connection in areas with a high
risk of mechanical damage.
k)
Before each use, make sure that the nozzle is properly mounted in the machine
and that the hose is properly attached and undamaged.
l)
The air supplied to the machine should be dehumidified, clean, and free of
contaminants. Contaminants can clog hoses and cause damage to the machine
and its components.
m) Do not carry or hang the unit by the pressure hose.
n)
Do not touch moving parts or accessories unless the unit has been
disconnected from the compressed air supply.
o)
If you notice any leakage from the unit or hoses, immediately disconnect the
compressed air supply and correct the fault. Clean the device regularly to
prevent permanent dirt build-up.
p)
Do not exceed the recommended supply pressure as this may damage the unit.
q)
Do not obstruct the air inlet or outlet.
r)
The product is not a toy. Cleaning and maintenance must not be performed by
children without adult supervision.
s)
Do not tamper with the device to alter its performance or design.
t)
Keep the unit away from sources of fire and heat.
u)
The device is designed to be supplied with compressed air. The use of other
gases to power the device is prohibited!
v)
It is prohibited to direct the outlet of the device toward yourself, other people
and animals.
w)
Maintain a safe distance between the working area of the device and
bystanders.
x)
Do not keep your hands on the trigger of the device when not in use! Risk of
uncontrolled launch!
y)
Before loading, unloading the device, or leaving the work area, remember to
disconnect the device from the compressed air supply.
z)
Caution! Releasing the trigger of the device with a filled magazine generates a
strong impact between the outlet and the working surface. Special care should
be taken!
aa) Maintain a safe distance between the work surface and other objects that may
be near the operation of the device.
EN
Publicidad
