Publicidad
Idiomas disponibles
Idiomas disponibles
bb) Caution! If, during the operation of the device, the fastener is jammed in the
outlet of the device, disconnect the device from the power source before
correcting the fault! Risk of injury!
cc) Remember to lubricate the compressed air inlet before any work with the
device (2 drops of oil).
dd) The device is designed for pneumatic fixation of elements! It is forbidden to
use the device as a hammer! Do not overload the device.
ee) Keep the handles dry, clean and free of oil or grease.
ff)
Do not run the device empty - this accelerates the wearing of the device.
CAUTION! Although the product has been designed to be safe and
has adequate safeguards and despite the additional safety features
provided to the user, there is still a slight risk of accident or injury
when handling the product. Caution and common sense are advised
when using the product.
3. Instructions for use
The machine is designed to install framing nails of the appropriate size and at a
fastener attachment angle of 34 degrees.
The user is responsible for any damage resulting from misuse.
3.1.
Product overview
EN
Publicidad
