DITTING 804 Instrucciones De Uso Originales página 34

COMMERCIAL COFFEE GRINDER
Star ng grinding
1. Start the grinding process by switching the on/off switch (3) to switch
posi on I.
2. The grinding is completed as soon as the grinder is idling and no grinding
noises are audible.
3. Now ac vate the scaler (8) several mes in succession by pulling up and
releasing the scaler.
Any grist residues that are stuck are removed from the grinder.
4. Switch off the grinder by se ng the on/off switch to switch posi on 0.
Changing coff ee variant
Before grinding, 2 grams of the new coff ee variant should be ground to avoid
mixing the previous grindings.
Cleaning
CAUTION!
Risk of injury!
The grinder can fall over when moved and cause injury.
– Place the grinder on a stable, lt-proof surface.
– Ask another person for help if the grinder is too heavy.
INFORMATION!
Risk of short-circuit!
Water penetra ng the grinder can cause a short-circuit.
– Never immerse the grinder in water or any other liquids.
– Never clean the grinder with a water jet.
– Also make sure that no water or other liquids end up in the
casing in any other way.
34