DITTING 804 Instrucciones De Uso Originales página 37

8. Grind the same amount of coff ee beans as you did grinder cleaner in or-
der to remove le over cleaning par cles. Set the grinding degree to the
desired se ng during the grinding process.
9. Dispose of the ground grinding cleaner and the ground coff ee beans in
the commercial/domes c waste.
Troubleshoo ng
Error
The grinder is • The outlet is
humming but
not grinding.
• The grinding de-
• A foreign object is
Cause
clogged.
gree is too fi ne.
in the grinder.
Remedy
’ Set the grinding degree se ng
to "most coarse" and trigger the
grinding process. The grinder will
grind itself clear. Then set the
desired grinding degree se ng
to the desired grinding degree
during opera on.
’ Operate the grinder's scaler sev-
eral mes to clear the blockage.
’ Set the grinding degree se ng
to "most coarse" and trigger the
grinding process. The grinder will
grind itself clear. Then set the
desired grinding degree se ng
to the desired grinding degree
during opera on. Should the
problem persist, contact your
supplier (see chapter "Mainte-
nance and service").
’ Clean the grinder as described
in the "Cleaning" sec on and
remove the foreign object at the
same me. If the foreign object
can not be removed, contact
your supplier
(see chapter "Maintenance and
service").
804 | EN
37