Selecting Dab Mode; Selecting Dab Seek Mode - Kenwood KTC-9090DAB Manual De Instrucciones

than one Service. The Services include the Audio
programme and Data service.
• Also, the Services include various Service Information
such as the Service Label (name), network
information, etc. For example, information such as an
RDS station broadcasts is the same programming as
with the DAB services provided.
• Based on this data, when it is no longer possible to
receive the DAB, there will be automatic switching
to the RDS station which will allow continued
monitoring of the Service.
❈ Programme organisation has been created for
descriptive purposes and differs from actual
broadcasts. Also note that depending on time, the
number of programmes is subject to change.
Audio programme service consist of;
• Audio Modes
There are three modes: stereo, joint stereo , and
single channel (e.g., mono).
• Sound Quality
There are a variety of levels which range from sound
quality on par with a telephone to highquality
sound at the level of CD. There is also a mode that
cuts the sampling frequency in half to raise the
transfer efficiency.
Audio mode and sound quality are each used to
advantage in broadcasts depending on the contents
of the Service (Audio programme). In addition, the
textual information (Dynamic Label) related to the
service (Audio programme) can be transmitted.
Alarm announcement;
When an emergency programme is broadcast in
case of a disaster, all functions are interrupted and
switched to the alarm announcement.

Selecting DAB Mode

ABCDG
Press the [SRC] button.
Select the "DAB" display.
EF
Refer to the Source mode page of the instruction
manual of your control unit.

Selecting DAB Seek Mode

Select the method how to select an ensemble.
A*
2
Press the [AUTO] button.
ABCDG (except for A*
1
Display the menu mode using the control unit
and select a setting item.
2
Selecting Tuning Mode:
Switch the setting of the menu items.
3
Exit from the menu mode.
EF
Touch [SEEK] to switch the Seek mode.
Display and Setting
Tuning mode Display
Auto Ensemble Seek "Seek Mode Auto 1"/"AUTO 1"/"AUTO"
Preset Service Recall "Seek Mode Auto 2"/"AUTO 2"
Manual Seek "Seek Mode Manual"/"MANUAL"
NOTE
• As for D group, the Pre-set Service Recall of the AUTO2
cannot be set.
ABCDEFG
ABCDEFG
2
)
11
|
English