Auto Ensemble Memory Entry - Kenwood KTC-9090DAB Manual De Instrucciones

Multi Key of A group
Before proceeding to Step 3 descried above,
change sections to the preset section.
Refer to <Station Preset Memory> of the tuner
function. See the control unit instruction manuals
for its operations.
G
1
Press the [FM] button to select the preset band.
2
Enter Memory mode
Press the [#3] button for at least 1 second.
"Preset Memory" is displayed.
3
Receive the service to be preset.
4
Select the preset number
Press the [FM] or [AM] button.
5
Put the service in the memory
Press the [#3] button for at least 2 seconds.
The preset number display blinks 1 time.
6
Repeating steps 3 to 5 and putting the desired
service in the memory.
On each band, 1 service can be put in the memory
on each [#1] — [#6].
7
Exit Memory mode
Press the [#3] button.
NOTE
• Up to 6 services can be preset in each of preset bands
DAB1, DAB2 and DAB3.
• As the preset memory consists of the storage of services,
the distinction of Primary and Secondary service
components is not preset. The Primary service component
is received when a service is recalled.
• If no Service is being received, it cannot be stored in
memory.
• Preset bands DAB1, DAB2 and DAB3 refer to the bands for
use in preset memory and do not mean different receiving
bands.
• G: You can set up to 6 memories even on a control unit
with 8 preset buttons.

Auto Ensemble Memory Entry

Ensembles that can be received through the pre-set
band currently being heard are automatically stored
in memory one after another.
A representative Service of the Ensembles stored in
memory can be called up with a one-touch operation.
This function is convenient in such cases as when on
a journey where one has no idea what ensemble is
available. Up to 6 ensemble can be stored this way.
Preset button:
A* 3
1
Select the preset band for auto ensemble
memory entry.
2
Press the [AUTO] button for at least 2 seconds.
After storing in the memory finishes, the number
of the pre-set buttons and the ensemble label are
displayed.
ABCDG (except for A*
1
Select the preset band for auto ensemble
memory entry.
2
Display the menu mode using the control unit
and select a setting item.
Select the "Auto Memory"/ "A-MEMORY" display.
3
Press the setting button of the menu items on
the control unit for at least 2 seconds to start the
Auto ensemble memory entry.
After storing in the memory finishes, the number
of the pre-set buttons and the ensemble label are
displayed.
EF
1
Select the preset band for auto ensemble
memory entry.
2
Touch [AME].
3
Touch [4] or [¢] to start auto ensemble
memory entry.
ABCÎEFG
3
)
13
|
English