Traffic Announcement Function; News Bulletin Function With Announcement News Timeout Setting; Presetting Volume For Announcement - Kenwood KTC-9090DAB Manual De Instrucciones

F
Setting can be carried out on the DAB Setup
Screen. (page 9)
NOTE
• The setting of the interruption of the "Alarm" is always ON.
Switching to OFF is not possible.
• During an interruption another announcement cannot
interrupt the item.
Languages to be displayed (except for F)
Select English, French, German, Dutch, Spanish,
Portuguese, Norwegian or Swedish in <Language
Filter Search Mode>/ <Language Filter Select
Mode> to display in the selected language. (page
17)

Traffic Announcement Function

Traffic information can be received automatically. It
is also possible to play a tape or disc whilst waiting
for a traffic announcement programme to start.
Set this function referring to the <Traffic
Information Function> of the control unit.
If the [TI] button is not provided set through the
menu.
Traffic Announcement Function is displayed as "TI".
When the function is on, the TI indicator is turned
on.
In the case of an Ensemble provider supporting the
Traffic Announcement, the TI indicator is turned on.
When a Traffic Announcement programme starts,
"TRAFFIC INFO"/ "TRAFFIC" is displayed, adjusting
the volume to the set level.
When a traffic information programme starts whilst
playing a tape or a disc, automatic switching to the
traffic information happens.
Either an ending of the traffic information or
deterioration of the receiving signal results in
switching back to the previous source.
NOTE
• This setting is valid for both the DAB and RDS sources.
• As for D group, turning the function ON causes the
TI indicator light up and an interruption causes the
TA indicator to turn on. In the case that the Ensemble
supports the Traffic Announcement, the TP indicator turns
on.
ÅıCDEÏÌ
News Bulletin Function with
Announcement News Timeout Setting
The News Bulletin information can be listened to
in priority by overriding another programme or
source. When this function is turned on, the interval
for allowing the overriding of news (news timeout
period) can be set in the range between 10 and 90
minutes.
1
Set this function referring to the <News Bulletin
Function with PTY News Timeout Setting> of the
control unit.
2
Starting the News Announcement programme
causes the NEWS indicator to blink, adjusting
the volume to the set level.
NOTE
• This setting is valid for both the DAB and RDS sources.
• This function cannot be used if the <RDS function> and
the <News Bulletin Function with PTY News Timeout
Setting> are not provided for in the control unit.
• As for E group, refer to <News Bulletin Function with PTY
News Timeout Setting> of the RDS function.

Presetting Volume for Announcement

Pre-setting the volume unique to announcements is
possible.
A* 1 G* 1
During reception of announcement the adjusted
volume is automatically remembered, and the next
time it switches to announcement it's automatically
the remembered volume.
ABCDEFG (except for A*
1
Receive a DAB station.
2
Adjust the volume for the announcement.
3
Press the [TI VOL ADJ] button for at least 2
seconds.
An indication of the volume blinks once and the
volume is stored in the memory. Announcements
can be heard at this volume.
NOTE
• This setting is valid for both the DAB and RDS sources.
• This function cannot be set if the <Pre-setting Volume for
Traffic Information/News> function of the RDS function is
not provided for in the control unit. (except for A*
ÅıCDEÏÌ
ABCDEFG
, G*
1 1
)
1 , G* 1 )
➥
19
|
English