TDK relyon plasma piezo brush PZ3-i Manual De Instrucciones página 13

Specification for connecting lines:
Standard
Number of
poles
Head shape
Reference
voltage DC [V]
Reference
current [A]
Coding
Cable cross-
section
Maximum
length
*Please note that EMC compatibility levels were only measured on 0.3 m lengths of cable between module
carrier and driver housing. Lengths beyond this can cause deviations from these measurement results
depending on the routing in the installation and, in case of doubt, would have to be measured by the
company operating the system in the given integration situation.
Caution – Electrical voltage!
The wires may only be connected to the power supply unit or control system
by authorised electrically skilled persons!
If there is any visible damage to the wiring:
- do not start up the device;
- arrange to have the damaged parts repaired by a qualified person or
replace them.
BA-PZ3_i_ML / F0354902
M8 plug connector IEC 61076-2-104
3 6
Socket/ Plug/male
female
60 30
4 1.5
A/Stand. A/Stand.
3x 0.25 6x 0.14
mm² mm²
30 m 30 m
8 6
Straight plug to Straight plug to
straight socket straight socket
30 30
1.5 1.5
A/Stand. A/Stand.
8x 6x
0.14 mm² 0.14 mm²
1.0 m* 0.3 m*
13