Brinkmann TRAILMASTER 810-3304-S Manual Del Propietário página 6

Clear an assembly area and get a friend
to help you put your grill together. Lay
card board down to protect grill finish and
assembly area.
Step 1
Place the grill body assembly on its
end with the lid open. Make sure that
another person is holding the grill body
assembly steady. Attach one long leg to
the grill body assembly. Align the bolts
of leg with the pre-drilled holes in the
grill body assembly as illustrated. Attach
using four M6 x 12 mm bolts, M6 flat
washers and M6 nuts. Hand tighten
only. Attach one wheel leg to grill body
assembly. Align the bolts of the leg with
the pre-drilled holes in the grill body
assembly as illustrated. Attach using
four M6 x 12 mm bolts, M6 flat washers
and M6 nuts. Hand tighten only.
Step 2
Insert the bottom shelf (curved end
pointed down) into the mounted legs.
Insert bottom shelf into right long leg.
Attach right long leg onto grill body
assembly using the same technique
described in Step 1. Attach wheel leg
to grill body assembly using the same
technique described in Step 1.
Step 3
Insert wheel axle through left front
and rear legs and attach wheels using
two M12 nuts as illustrated. Tighten
securely.
5
Grill Body
Assembly