Kärcher Admiral X Manual Del Usuario página 27

Vacuum Motor Replacement
Only qualified maintenance personnel are to perform
the following repairs.
Seul le personnel d'entretien qualifié peut effectuer des
réparations.
1. Turn off all switches and unplug machine.
2. Remove recovery tank.
3. Remove the (2) screws that fasten the solution
tank to the frame, and tilt tank back to expose the
inside of the frame.
4. Locate the vacuum motor wires and disconnect at
the connector. Close the solution tank.
5. Remove the (6) screws holding the vacuum motor
cover to the solution tank.
6. Remove the vacuum motor.
7. Reverse process to install vacuum motor.
8.645-740.0 Manual Operator - Admiral X/Admiral XL
Maintenance
27