UNFOLDING GUIDE
Figure A
When in use, you can put the Sliding Rail (No. 62)
down.
Pull out Pull Pin (No. 60) from the hole on the Main
Frame (No. 44), then remove Knob (No. 47) and
Washer (No. 46) from Sliding Rail (No. 62). (Figure
A)
Slightly lay down the Sliding Rail (No. 62), then
tighten Knob (No. 47) and Washer (No. 46) to Main
Frame (No. 44). and insert the Pull Pin (No. 60) to
Main Frame (No. 44). (Figure B).
Figure B
9