SMA HS-BM-3.28-10 Instrucciones Breves página 9

SMA Solar Technology AG
Risk of injury due to weight of product
Injuries may result if the battery modules are lifted incorrectly or dropped while being transported
or mounted.
• Transport and lift the product carefully. Take the weight of the product into account.
• Transport the product individually only.
• Always have several persons transport and mount the product. The number of persons
depends on the locally applicable standards and directives.
• Use suitable means of transport, e.g. a dolly. Do not damage the enclosure of the battery
components.
• Wear suitable personal protective equipment, at a minimum safety footwear with a non-slip
sole and steel cap, for all work on the product.
Risk of burns due to hot battery modules
The battery module can get hot during operation. Touching hot battery modules can cause burns.
• Before touching the battery modules, wait until the battery modules have cooled down.
Risk of injury due to sharp edges
The battery components contain sheet metal parts with sharp edges. Touching the sharp-edged
sheet metal parts may result in injuries.
• Wear safety gloves for mounting and disassembling the battery.
Damage to the battery modules due to moisture or corrosive substances
Moisture or corrosive substance penetration can damage the product and impair its functionality.
• Do not immerse battery modules in liquid.
• Do not expose battery cells to corrosive substances (e.g., ammonia, salt).
Damage to the product due to cleaning agents
The use of cleaning agents may cause damage to the product and its components.
• Clean all battery components with a dry cloth only.
Quick Reference Guide
WARNING
CAUTION
CAUTION
NOTICE
NOTICE
HS-BM-328-10-IS-xx-13
2 Safety
9