Necessary Settings Before Use; Charging The Battery Pack; Date/Time Setting - JVC GZ-MS120 Manual De Instrucciones

Necessary Settings before Use

Charging the Battery Pack

1
Close the LCD monitor to turn off the
camcorder.
2
Attach the battery pack, then connect battery pack, then connect
the AC adapter.
•
With the "

pointing at the correct direction, slide the
battery pack until it locks in place.
 Arrow
AC Adapter
To AC Outlet
(110V to 240V)
•
The power/charge lamp blinks to indicate
charging has started.
•
When the lamp goes out, charging is
finished.
L
To check the remaining battery power
See page 21.
L
Required charging/recording time
(approx.)
*When the LED light is off and the monitor
backlight is set to [STANDARD] mode.
Battery pack
BN-VF808U
(Provided)
BN-VF815U
BN-VF823U
1
" (arrow) on the battery pack
Charging time Recording time
1 hr. 50 min. 2 hr. 45 min.*
2 hr. 40 min. 5 hr. 25 min.*
3 hr. 40 min. 8 hr. 10 min.*
L
To detach the battery pack
NOTE
•
You can also use the camcorder with just
the AC adapter.
•
The actual recording time may shorten
depending on the recording environment,
such as when recording scenes with fast
moving.
•
Please do not pull or bend the AC adapter
plug and cable. This may damage the AC
adapter.

Date/Time Setting

1
Open the LCD monitor to turn on the
camcorder.
2
Touch MENU.
3
Select [DISPLAY SETTINGS].
4
Select [CLOCK ADJUST].
VIDEO
SELECT ASPECT RATIO
WIND CUT
AUTO SWITCH REC MEDIA
DISPLAY SETTINGS
CONFIGURE ON-SCREEN DISPLAY
SET QUIT
DISPLAY SETTINGS
LANGUAGE
9
: CLOCK ADJUST
; DATE DISPLAY STYLE
B
MONITOR BRIGHT
SET DATE AND TIME
SET QUIT