Necessary Settings Before Use; Charging The Battery Pack; Date/Time Setting - JVC GZ-MG670 Manual De Instrucciones

Necessary Settings before Use

Charging the Battery Pack

1
Close the LCD monitor to turn off the
camcorder.
2
Attach the battery pack, then connect
the AC adapter.
AC Adapter
To AC Outlet
(110V to 240V)
•
The power/charge lamp blinks to
indicate charging has started.
•
When the lamp goes out, charging is
finished.
To check the remaining battery power

See page 21.
Battery pack
BN-VF808U
(Provided)
BN-VF815U
BN-VF823U
1
EN
Charging time
1 h 50 m
2 h 40 m
3 h 40 m
To detach the battery pack

NOTE
•
You can also use the camcorder with just the
AC adapter.
•
The actual recording time may shorten
depending on the recording environment,
such as when recording scenes with fast
moving subject.
•
Please do not pull or bend the AC adapter
plug and cable. This may damage the AC
adapter.

Date/Time Setting

1
Open the LCD monitor to turn on the
camcorder.
2
Touch MENU.
3
Select [DISPLAY SETTINGS].
4
Select [CLOCK ADJUST].