Necessary Settings Before Use; Charging The Battery Pack; Date/Time Setting - JVC GZ-X900 Manual De Instrucciones

Necessary Settings before Use

Charging the Battery Pack

Attach the battery pack.(
•
You can also connect the AC adapter using
the Everio dock connector. (Z p. 9)
•
The power/charge lamp blinks to indicate
charging has started.
•
When the lamp goes out, charging is
finished.
•
Unplug the AC adapter from the AC outlet
and disconnect the AC adapter from the
camera.
To check the remaining battery power

See page 20.
To detach the battery pack

Open the LCD monitor and turn off the
camera using the DISPLAY/< button before
detaching the battery pack.
NOTE
•
You can also use the camera with just the AC
adapter. (Z p. 4)
•
Please do not pull or bend the AC adapter
plug and cable. This may damage the AC
adapter.

Date/Time Setting

1
Open the LCD monitor to turn on the
camera.
2
Touch MENU.
3
Select [DISPLAY SETTINGS].
1
EN
Z
p. 4)
4
Select [CLOCK ADJUST].
5
Select [CLOCK SETTING].
6
Select the city closest to the area
where you use the camera.
Selected area is highlighted
Principal city of the
selected area
Time difference to
GMT
7
Select [ON] if daylight saving time is
observed.
8
Set the date and time.
Change the setting by using the touch
sensor and select [
9
Select [SAVE].
To reset the setting, select [CANCEL].
&
] to set.