Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
1
Marking the installation location
Locate the proper position for the pedestal sink. Make sure
that you have access to all plumbing and drain ttings,
door clearance, and any other obstructions.
Place the pedestal basin (A) on the pedestal leg (B) and
move into the desired position against the wall. Make sure
that the pedestal basin (A) is leveled on the pedestal leg
(B). With a pencil, mark the location of the pedestal basin
(A) support holes on the wall.
On the marked location on the wall, drill holes with a 5/8 in.
drill bit if the pedestal will not be attached onto a stud. If
the pedestal will be mounted onto a stud, then drill holes
with a 1/8 in. drill bit.
2
A
B
5
Installing the faucet and pop-up
assembly
Carefully remove the pedestal basin (A) from the pedestal
leg (B) and install the faucet and pop-up assembly (not
included) onto the pedestal basin (A).
Please contact 1-855-HD-GLACIER for further assistance.
B
HOMEDEPOT.COM/GLACIERBAY
A
Publicidad
