Publicidad
Idiomas disponibles
Idiomas disponibles
d. Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power
tool. Power tools are dangerous in the hands of
untrained users.
e. Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the
power tools operation. If damaged, have the power
tool repaired before use. Many accidents are caused
by poorly maintained power tools.
f. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
h. Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
Battery tool use and care (only used for
5.
battery tools)
a. Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
b. Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
c. When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws, or other small metal objects, that
can make a connection from one terminal to
another. Shorting the battery terminals together may
cause burns or a fire.
d. Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
e. Do not use a battery pack or tool that is damaged
or modified. Damaged or modified batteries may
exhibit unpredictable behaviour resulting in fire,
explosion or risk of injury.
(Original instructions)
f. Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or
temperature above 130 °C may cause explosion.
NOTE: The temperature „130 °C" can be replaced by
the temperature „265 °F".
g. Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging
improperly or at temperatures outside the specified
range may damage the battery and increase the risk
of fire.
Service
6.
a. Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool
is maintained.
b. Never service damaged battery packs. Service of
battery packs should only be performed by the
manufacturer or authorized service providers
Additional Specific Safety Instructions for
Material Dispensers
Hold tool by insulated gripping surfaces when performing
u
an operation where tool may contact hidden wiring.
Contact with a "live" wire will also make exposed metal
parts of the tool "live" and shock the operator.
Keep hands out of the plunger and plunger rod area of
u
the caulk/adhesive dispenser. Fingers can be crushed
between the tube holder and the plunger.
When operating the caulk/adhesive dispenser overhead,
u
do not have plunger rod in the path of your eyes or
head. Plunger rod may slip back in direction of user.
Always wear eye protection when using the caulk/
adhesive dispenser.
Always work in properly ventilated area and wear
u
appropriate respiratory protection if necessary. Fumes
from some caulks and adhesives can be noxious.
Turn unit off and disconnect battery pack before installing
u
and removing accessories, before adjusting or when
making repairs. An accidental start-up can cause injury.
Use only accessories that are recommended by the
u
manufacturer for your model. Accessories that may be
suitable for one tool may be hazardous when used on
another tool. The use of improper accessories may cause
risk of injury to persons.
Lock trigger in the OFF position when not in use to avoid
u
inadvertent release of material.
Take care not to get caulk or adhesive on battery
u
contact points.
Always read and follow all manufacturer's instructions
u
regarding caulk or adhesive. Failure to do so may result in
personal injury.
Do not use for food preparation.
u
ENGLISH
19
Publicidad
