Smoothskin Pure Mini Lite Manual De Instrucciones página 24

b) Press the handset firmly against the area to be treated ensuring the skin tones sensor is
in contact with the skin. If the skin tone sensor does not detect a valid skin tone, then
the handset cannot be activated. When the skin tone sensor measures a valid skin tone,
the light around the activation button will illuminate WHITE to indicate the device is
ready to flash.
c) Press the activation button. The device will flash, and a warm sensation should be felt.
d) Move the handset to the next area to be treated and repeat. The device needs to
recharge between flashes. This will only take about 0.6 seconds.
e) Ensure that the entire area receives treatment, and treat any stubborn areas (such as
underarms) with multiple passes (running your device over the same area a maximum
of 3 times), but DO NOT overlap treatment pulses.
Treatment
Window
WARNING: Make sure not to cover the vents on the device whilst treating, as this can lead to the
device overheating. SmoothSkin Pure Mini Lite is an extremely fast and powerful device, allowing you
to complete a whole body treatment in under 10 minutes.
24
Full coverage Overlapping Missed areas