Descargar Imprimir esta página

Ryobi PCLST01 Manual Del Operador página 14

Recortadora de bordes de 18 v

Publicidad

Idiomas disponibles

Idiomas disponibles

PROBLEM
Line will not advance, or will not
advance easily when using the auto-
feed head
Grass wraps around boom
housing and string head
Motor fails to start when switch
trigger is depressed
This product has a Three-year Limited Warranty for personal,
family, or household use (90 days for business or commercial use).
For warranty details, visit www.ryobitools.com
TROUBLESHOOTING
POSSIBLE CAUSE
Line is welded to itself.
Not enough line on spool.
Line is worn too short.
Line is tangled on spool.
Cutting tall grass at ground
level.
Battery is not secure.
Battery is not charged.
For any questions about operating or maintaining your product,
Your product has been fully tested prior to shipment to ensure
or call (toll free) 1-800-525-2579.
11 — English
Remove spool cap and pull spool partially
out of trimmer head without removing the line
from eyelets. Spray line with silicone spray.
NOTE: Do not remove spool entirely or unwind
line.
Replace spool. Refer to Spool Replacement
earlier in this manual.
Pull line while pressing button.
Replace spool. Refer to Spool Replacement
earlier in this manual.
Cut tall grass from the top down to prevent
wrapping.
To secure the battery pack, make sure the
latches on each side of the battery pack snap
into place.
Charge the battery pack according to the
instructions included with your model.
CALL US FIRST
call the RYOBI Help Line!
your complete satisfaction.
SOLUTION

Publicidad

loading