Publicidad
Idiomas disponibles
Idiomas disponibles
EN
service center unless indicated elsewhere in this
manual.
• Remove or disconnect battery before servicing,
cleaning, or removing material from the gardening
appliance.
• Do not modify or attempt to repair the appliance or
the battery pack (as applicable) except as indicated
in the instructions for use and care. Use appliances
only with specifically designated battery packs. Use
of any other battery packs may create a risk of injury
and fire. Use only with Greenworks BAB740 battery
or other BAB series.
• Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one
type of battery pack may create a risk of fire
when used with another battery pack. Use only with
Greenworks GCH8020 charger or other CAB series.
• When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws, or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause a
fire.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or
burns.
• Do not use a battery pack or appliance that
is damaged or modified. Damaged or modified
batteries may exhibit unpredictable behavior
resulting in fire, explosion, or risk of injury.
• Do not expose a battery pack or appliance to
fire or excessive temperature. Exposure to fire or
temperature above 265 °F (130 °C) may cause an
explosion.
• Do not dispose of the batteries in a fire. The cells
may explode. Check with local codes for possible
special disposal instructions.
• Do not open or mutilate the batteries. Released
electrolyte is corrosive and may cause damage to
the eyes or skin. It may be toxic if swallowed.
• Exercise care in handling batteries in order not to
short the battery with conducting materials such as
rings, bracelets, and keys. The battery or conductor
may overheat and cause burns.
• Follow all charging instructions and do not charge
the battery pack or appliance outside of the
temperature range specified in the instructions.
Charging improperly or at temperatures outside of
the specified range may damage the battery and
increase the risk of fire.
• Have servicing performed by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the product is
maintained.
English
• Keep guards in place and in working order.
• Keep hands and feet away from cutting area.
• Disconnect the battery pack from the appliance
before making any adjustments, changing
accessories, or storing appliance. Such preventive
safety measures reduce the risk of starting the
appliance accidentally.
• Use only with nylon cutting line with a max diameter
of 0.095" (2.4 mm) . Do not use heavier lines
than recommended by the manufacturer and line
materials of other types – for example, metal wire,
rope, and the like.
SAVE THESE INSTRUCTIONS
2.3
INSPECT SAFETY FEATURES
• Examine the work area to identify any potential
hazards, such as uneven terrain, slopes, rocks,
branches, or ditches.
• Perform all required safety inspections,
maintenance, and servicing as specified in this
manual.
• Check that all covers, guards, handles, and cutting
equipment are properly attached and undamaged.
• Check the cutting attachment and cutting
attachment guard for any damage or cracks and
replace if necessary.
2.3.1
CHECK THE SAFETY-LOCK BUTTON AND
TRIGGER
The safety-lock button is designed to prevent
accidental operation. See Product overview to find
where these parts are located on your product.
1.
Make sure that the trigger is locked when the
safety-lock button is not pressed.
2.
Make sure that the trigger and safety-lock button
move freely and that the return spring works
correctly.
3.
Simultaneously push the safety-lock button and
pull the trigger to start the product.
4.
Test on high-speed mode.
5.
Release the trigger and make sure that the
cutting attachment stops completely.
2.3.2
CHECK CUTTING ATTACHMENT GUARD
The cutting attachment guard is a crucial safety device
that prevents objects from being thrown towards the
operator and prevents injury if the cutting attachment is
touched.
6
Publicidad
