INVENTOR E2-ION16L Manual Del Propietário página 10

• For special humidity conditions where big amounts of condensation need
to be extracted, such as extremely moist rooms.
SMD
Smart Dehumidification – The dehumidifier will set the humidity level between 45% to
55% according to the rooms temperature thus ensuring energy efficiency and excellent
room conditions.
• While operating in this mode the manual humidity settings function is
unavailable.
PLUS (+) AND MINUS (-) CONTROL BUTTONS
Humidity Set Control Buttons
The humidity level can be set within a range of 35%RH (Relative Humidity)
to 85%RH(Relative Humidity) in 5% increments each time one of the relative
buttons are pressed, as long as no other functions (Dryer, Cont. or SMD) are
in operation simultaneously.
• For drier air press the "Minus" (-) pad to set a lower percent value (%)
• For damper air, press the "Plus" (+) pad to set a higher percent value.
TIMER ON / OFF
Press the "TIMER" button to initiate the auto START and auto STOP function in combination
with the PLUS (+) and MINUS (-) buttons.
When the unit is off:
• Press the Timer pad to activate the AUTO START function. By pressing once
again the AUTO STOP function is activated.
• Press the (+) or (-) pad to change the AUTO time by 0.5 hour increments, up
to 10 hours, or by 1 hour increments up to 24 hours.
• The time selected will be stored within 5 seconds and the main display will
automatically turn off.
10
Note: When none of the above MODE functions
are selected (Dryer, Cont., SMD) and all
indication lights are off the desired humidity
levels can be set manually by pressing the PLUS
(+) or MINUS (-) buttons.
Note: This function can't work simultaneously
with the Dryer, Cont. or SMD modes activated.
EN