Publicidad
Idiomas disponibles
Idiomas disponibles
1
EN
MANDO A DISTANCIA DEL REPRODUCTOR
1.-
: player/recorder power/StandBy button.
2.- CH-/CH+: in FM mode, switches to the previous/next stored frequency.
3.-
/ : in Bluetooth and USB mode, short press to skip to previous/next audio
track, and a long press performs a fast rewind/fast forward of the song.
4.- VOL-/VOL+: allow you to increase/decrease the volume of the player.
5.- 0-9: numeric buttons. In USB mode, direct selection to play a specific audio
track. In radio mode, they allow you to select the stations stored in memory.
6.-
: in USB mode, allows you to select the repeat mode:
-
RANDOM: plays the songs in random order.
-
BROWSE: plays the first 10 seconds of each song.
-
ALL: plays the songs in order and restarts at the end.
-
NORMAL: plays all songs in order and stops at the end.
-
SINGLE: plays the same song over and over again.
-
FOLDER: plays the songs contained in the same folder as the song currently playing.
7.- MODE: short presses of this button allows you to change the mode on the player to choose the desired
1
2 3 4
audio source: Bluetooth, Bluetooth, FM radio, recorder or recording player.
8.- EQ: in Bluetooth or USB mode, allows switching between the different existing equalisations (EQ 1-6).
9.-
: in Bluetooth or USB mode, starts/pauses audio playback; in FM mode, automatically memorises all
detected frequencies with sufficient signal quality.
BASIC OPERATION
PRIORITY (VOX)
The microphone input has priority over all other input signals of the equipment. This priority attenuates the
selected input when it detects signal at the MIC microphone input.
This priority is regulated by the VOX control associated with the MIC input on the rear panel. With this
control we modify the sensitivity level of the equipment to activate this priority and even cancel it if we set it
to minimum, in the latter case, the equipment will mix the microphone audio with the selected input signal.
INPUT SELECTION
The INPUT control allows you to select which input is to be played at the output along with the microphone input. The
options are:
-
AUX: will mix the 2 inputs AUX 1 and AUX 2.
-
LINE: LINE input.
-
DIGITAL: OPTICAL or COAXIAL inputs. OPTICAL input has priority over COAXIAL input.
FM/USB/ : selects the player. The desired mode should be selected by using the MODE button
-
1
on the player.
3
4
5
PLAYER
To play audio from Bluetooth, USB device, FM radio tuner or recorded tracks, you must select the player as
the audio source by setting the INPUT control to the FM/USB/ position. Then you have to select the mode
using the MODE button.
2
3
4
5
7
8
9
5
6
2
3
4
8
6
7
8
6
7
10
11
12 14
13
5
6
7
10
11 12 13
9
- 4 -
10
11 12 13
9
1
2
3
4
5
USE ONLY WITH A 250 FUSE
15
16
8
9
1
2
3
4
5
6
7
8
9
11 12 13
10
6
1
7
2
8
3
9
4
5
Publicidad
