Publicidad
Idiomas disponibles
Idiomas disponibles
EN
CONNECTION
-
Before making any connections, make sure that all equipment is switched off and disconnected from the
power supply.
-
Check that all volume controls are set to minimum.
-
Connect all audio sources. If you are going to use the FM radio, you will need to connect an FM reception
antenna.
-
Connect the desired output to a power amplifier for amplification.
-
Connect the equipment to the power supply. Turn on the equipment in this order: peripheral equipment,
followed by the player. MIXPLAY-1 and, lastly, the power amplifier (if necessary).
-
Select the audio input on the INPUT selector: AUX, LINE, DIGITAL or FM/USB/ . If you select the latter,
then select the operating mode of the player using the MODE button.
-
Finally, adjust all volume, EQ (BASS, MID and TREBLE) and BALANCE controls.
TV
AMPLIFIER
- 6 -
USE ONLY WITH A 250 FUSE
230 V AC
Publicidad
