Publicidad
Idiomas disponibles
Idiomas disponibles
USB MODE
-
Insert the USB device and select USB mode. The display will show U in the top left corner. In addition,
the top line will also show the playback mode and playback time (00:00); and the bottom line will show
the song number (0001) and the name of the song.
-
Press / , or
/
NOTE: this mode allows you to change the playback mode and equalisation.
Bluetooth MODE
-
Select Bluetooth mode. The display will show BT along with the connection status. The display will show
UNCONNECTED.
-
To connect your device, open the Bluetooth settings screen on your smartphone or tablet. Activate the
Bluetooth function, select the BT device and pair with it. The amplifier will play 2 tones and the display
will show CONNECTED.
NOTE: this amplifier remembers the last 2 devices connected. So, if you are using one of these, you will
not need to do this linking process and the linking will be done automatically.
-
Select the music on your smartphone/tablet and start playback.
-
Make sure your smartphone/tablet is loud enough to be heard through the speakers. In this way, you
can control the volume from the MIXPLAY-1 itself at a later time without having to manipulate any other
equipment.
-
Press / , or
/
-
NOTE: this mode allows you to change the equalisation.
FM MODE
-
Select FM mode. The display will show RADIO. In addition, the bottom line will show the channel (CHL)
where the station is stored and the tuned frequency (000.0 MHz).
NOTE: to use this mode, you need to connect an antenna to the FM rear panel.
-
Perform an automatic tuning of the stations to start using this mode by long pressing the button
-
Once you have finished, you can select the station you want to listen to from among those tuned in with
/ in the front panel or CH-/CH+ on the remote control.
RECORD PLAYER MODE
-
With the USB device inserted, select USB mode. The display will show RE in the top left corner. In
addition, the top line will also show the playback mode and playback time (00:00); and the bottom line
will show the song number (0001) and the name of the song.
-
Press / , or
/
NOTE: this mode allows you to change the playback mode and equalisation.
RECORDER
To make a recording you must insert a USB device into the front panel. This recorder allows the recording
of audio from the AUX (AUX 1 + AUX 2), LINE or DIGITAL (OPTICAL or COAXIAL) source, together with the
microphone input.
-
Select the audio source with the control: AUX, LINE or DIGITAL.
-
Insert USB device and select RECORD recording mode. by pressing the MODE button. The display will
show RECORD-AUX.
button to start/pause recording. To end the recording, pause the recording and press the
-
Press the
MODE button. The recorded track will automatically start to play, to listen to it you have to switch the
input selector to the FM/USB/ position.
When a recording is made, a RECORDL folder will be created on the USB device. The tracks will be stored
inside in 128 kbps MP3 format with the name LINExxxx.mp3.
on the remote control, to change songs or to
on the remote control, to change songs or to
on the remote control, to change songs or to
starts/pauses playback.
pause/resume playback.
pause/resume playback.
- 5 -
EN
.
Publicidad
