GE Profile 23 Manual Del Propietario E Instalación página 11

About the crispersand pans.
vvww.GEAppliances.com
Not all features are on all models.
Fruit and Vegetable Crispers
Excess water that may accunmlate in the
bottom of the (h'awe_ should be wiped (h_'.
On some models, the bottom drawer has
filll extension slides that allow fifll access
to the
(h'awe_;
HI _ LO
Q_
Adjustable Humidity Crispers
Slide the control all the way to the
H/setting to proxide high humidit_
recommended for most xegetables.
Slide the control all the way to the
tO
setting to proxide h)wer h umidit}
lexels recommended for most fruits.
Convertible Deli Pan
The comertible deli pan has its own cold
air duct to allow a stream of cold air from
the fl'eezer compartment to flow to the pan.
The variable temperature control regulates
the airflow fl'om the Climate Keeper
About crisper removal
Not all features are on all models.
Set the control to the coldestsetfing to store
fl'esh meats.
Set the control to coldto convert the pan
to normal reflJgerator temperature and
provide extra vegetable storage space. The
cold air duct is turned ottl Variable settings
between these extremes can be selected.
Crisper Removal
The top ('rispe_ can easily be removed by
pulling the drawer straight out and lifting
the drawer up and over the stop location.
If the door prevents you from taking out
the di'awei's_
tii'st try to i'elllOVe
the
do()r
bins. If this does not Offer enotlgh
clearance, the refl_igerator will need to
be rolled fi)rward tmtil the door opens
enough to slide the (h'awe_ out. In some
cases, when you roll the reti_igerator out,
you will need to move the refl_igerator
to the left or right as you roll it out.
To remove the bottom crisper:
@ Pull the drawer out to the stop position.
@ Rotnte all fimr swing locks to the mflock
position.
0 I,itt the fl'ont oI the drawer up and ()tit.
Toreplace the bottom crisper:
Make sm'e all fimr _swim,_ locks are in
the mflock position.
Place the sides of the drawer into the
drawer supports, making sm'e the ,swim,
locks
fit on the
drawer slots.
I,ock all fimr swing locLs by rotating
them to the lock position.
11