GE Profile 23 Manual Del Propietario E Instalación página 17

Trimkits and decoratorpanels.
For CustomStyle
TM
models
Read these instructions completely and carefully.
Before YouBegin
Some models are equipped with trim kits that aflow you to instafl door panels. You can order
pre-cut black, white, bisque or stainless steel decorator panels from GE Parts and Accessories,
800.626.2002, or you can add wood panels to match your kitchen cabinets.
Panels less than 1/4" (6 mm) thick
\,_]_en installing wood panels less than ]/4" (6 ram) thick, you need to create a filler panel, such as 1/8"
(3 mm) cardboard, that will fit 1)etween the ti_ce of the door and the wood panel. If you are installing the
pre-cut decorator panels, pre-cut filler panels are included in the kit. The combined thickness ot the
decorator or wood panel and the filler panel shotfld be 1/4" (6 ram).
Panels 1/4" (6 mm) thick or less
1/4"(6 mm) Max.
3/4" (19 mm) or Raised Panel
A raised panel design screwed or glued to a l/4" (6 ram) thick backing, or a./4 (19 ram) routed board
can be tlsed. The raised portion of the panel nltlSt be fid)ricated to pemfit clearances of at least 2" (5. l cm)
from the handle side fin" fingerti, I) clearance
•/4 (19 ram) maMmum, will require that the outer :!/16 Panels thicker than l/4" (6 ram),
u I) to 3
.....
(8 ram) of panel perimeter be no thicker than 1/4" (6 ram).
Weight limitations for custompanels:
Fresh Food38 Ibs.(17kg) max.
FreezerDoor28 Ibs. (13kg) max.
Panels thicker than 1/4" (6 mm)
5/16" (8 ram)
mm) Max.
I_13/4" (19 mm)
1/4" (6 ram)
ThickBacking
°hoe qli[11
I _-_'Refrigerater
Door
17