GE Profile 23 Manual Del Propietario E Instalación página 5

About the temperaturecontrols, www.GEAppliances.co
The temperature controls are preset in the factory at 5 for both
the refrigerator and freezer compartments. Allow 24 hours for the
temperature to stabilize to the preset recommended settings.
Several adjustments may be required. Each time you adjust
controls, allow24 hours for the refrigerator to reach the setting
you have selected.
Setting either or both controls to 0 stops cooling in both the freezer
and refrigerator compartments, but does not shut off electrical power
to the refrigerator.
Control settings will vary based on personal preferences, usage and
operating conditions and may require more than one adjustment.
NOTE: The refrigerator is shipped with protective film covering the
temperature controls. If this film was not removed during installation,
remove it now.
Performance Ak FlowSystem
The Pettbt_nance :Mr How Svstetn is designed to nmxinfize temperature control in the reliigerator and
fl'eezer compartments. This tmique spedal feature consists of the Air Tower along the back wall of the
reiiigerator and the _di" Ttmnel on the bottoll_ portion of the fl'eezer rear wall. Pladng fi_od in fl'ont of the
louvers on these compoi_ei_ts will not affect peltbi_lmnce. ?dthough the _dI" Tower and the _dI" Ttmnel can
be removed, doing so will affect temperature perfimnance. (For remo\_fl instructions, on-line, 24 horns a
(la 5 contact us at GEAppliances.com or call 800.(;E.CARES. In Canada, contact us at w_v.geappliances.ca
or call 1.800.361.3400.)