GE Profile 23 Manual Del Propietario E Instalación página 19

Insertingthe doorpanels.
Read these instructions completely and carefully.
0 Insert the Freezer Panel and Fresh Food Panel
Carefully push the ti'eezer panel in until it slides
into the slot behind the door handle. Push the filler
panel (required with some dooi" panels) in behind
the decorator panel. Repeat fi)r fl'esh fi)od panel.
If)our model has a dispense_, this step only applies
to the fl'esh fi_od panel and top freezer panel.
0 Insert the Bottom Freezer Panel (on dispenser models).
Carefull) push the panel in until it slides into the (required with some door panels) in behind the
slot behind the door handle. Push the filler panel decorator panel.
0 Attach the Top Trim on the Freezer and Fresh Food Doors.
The Top T_im can be t0und inside the reliigerator each (loo_: Hand tighten only. Make sure that the
compartment, top ot each panel fits snugly behind the lip ot the
_ith a T-20 Torxd_i\'e_; attach the Top TFim, using Top TFim.
two screws on each Top TFim piece, to the top of
Cut-Out
t
SideTrim
19