Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
1. Check that the control knob (I) for the gas
supply system is turned to the "OFF" position
before starting any assembly.
2. Remove door from body (B) and place propane
gas tank (not included) into the metal stand inside
of the body (B).
3. Turn the cylinder valve on the tank
clockwise to close the propane tank.
Attach the preassembled regulator
from the body (B) to the cylinder valve
by turning the regulator coupling nut
clockwise. Make sure it is fastened
securely and tighten connections by hand
only.
Bond Manufacturing Co., Inc. | Page 6
CYLINDER VALVE
BLACK COUPLING NUT
turn clockwise to connect
REGULATOR
I
B
PRESSURE
RELIEF VALVE
BLEED-OFF
VALVE
turn clockwise
to reseal
Publicidad
