Publicidad
Idiomas disponibles
Idiomas disponibles
GENERAL SPECIFICATIONS
Polarity display
Overload display
Low battery indication
Test position error
Weight (including batteries)
ENVIRONMENTAL SPECIFICATIONS
Operating altitude
Safety standards
Pollution degree
Operating temperature and humidity
Storage temperature and humidity
Electromagnetic compatibility
ELECTRICAL SPECIFICATIONS
Ambient temperature
Ambient humidity
Note:
To ensure measurement accuracy, the operating temperature should be within 18°C~28°C
and the fluctuation range should be within ±1°C. When the temperature is <18°C or >28°C, add
temperature coefficient error 0.1 x (specified accuracy)/°C.
26
SPECIFICATIONS
Max display
Sampling rate
Sensor type
Jaw opening
Battery
Auto powe off
Dimensions
Accuracy
6000 counts
Auto
"OL" or "-OL"
" is displayed
"
3 times/s
Hall effect sensor
If the source under test is not placed at the
center of the clamp jaws when measuring
current, ±1.0% additional error in reading may
be produced.
42mm
3x1.5V AAA
15 minutes (can be disabled)
272mm×81mm×43.5mm
About 447g
2000m
IEC61010-1, IEC61010-2-032,
IEC61010-2-033;
CAT III 1000V, CAT IV 600V
0°C~30°C (≤80%RH), 30°C~40°C
(≤75%RH), 40°C~50°C (≤45%RH)
10°C~60°C (≤80%RH)
When RF=1V/m:
overall accuracy = specified accuracy
+ 5% of range
When RF>1V/m: not specified
± (a% of reading + b digits)
1 year calibration cycle
23°C±5°C
≤80%RH
2
Publicidad
