Sweiss SKYTIG 2033FX Manual De Usuario página 56

Press the
selection knob
Step two: Adjust the selection knob and select the pre ow time LED (7 is on); Press the selection
knob again, the pre ow time LED (7) is twinkling; It means the pre ow time can be adjusted.
Adjust the selection knob
and select the pre ow
time LED (7 is on); Press
the selection knob again,
the pre ow time LED (7) is
twinkling; It means the pre
ow time can be adjusted
Step three: If the adjustment is completed, con rm the parameter by pressing the selection knob ; or
the system will con rm the parameter automatically after 3 seconds.
HOT
START
ARC
FORCE
+
SELECTION
SKYTIG 2033
SWEISSWELD.COM
HOT
START
ARC
FORCE
+
SELECTION
SKYTIG 2033
SWEISSWELD.COM
18 SWEISSWELD.COM
TIG ULTRA pulse
technology
GAS 4T LIFT
MMA 2T LIFT
4T HF
2T HF
Hz
110/220V - 1Ph
TIG ULTRA pulse
technology
GAS 4T LIFT
MMA 2T LIFT
4T HF
2T HF
Hz
110/220V - 1Ph
Select TIG 4T or 2T