Sweiss SKYTIG 2033FX Manual De Usuario página 59

Complete the adjustment after 3 seconds, the operation panel will return to original condition;
welding current LED (10) is on. If the welding mode is TIG and the output pulse function is turned on,
the pulse pilot light (11) is on. If the output pulse function is turned o , the pulse pilot light (11) is o .
In MMA mode, the pulse pilot light (11) is o . All preset parameters with hold function.
If the parameter indicator lights up, then the selected parameter can be altered on adjusting dial.
DCY TDOWN
IW
IC
IB
TUP
IS
Hz
TPO
TPR
FP
Available parameters where 2T and 4T mode have been selected:
TPR: Gas pre- ow time
Unit: S
Setting range: 0.1 - 1
Factory setting
IS: Starting current (only with 4T)
Unit: A
Setting range: 5 - 100% of main current IW
Factory setting
TUP: Upslope time
Unit: S
Setting range: 0 - 5
Factory setting
IW: Welding current
Unit: A
Setting range: 5 - 200
21 SWEISSWELD.COM