ASSEMBLY INSTRUCTIONS
1b. Optional Deckplate Installation:
Shut off the water supply. Remove the old faucet.
Place the deckplate (D) and the gasket (E) on
the bottom of the new faucet assembly (A).
Insert the faucet assembly (A) through the hole
in the deckplate (D).
2. From underneath the sink, secure the faucet
assembly (A) to the sink with the quick install nut (B).
Push the quick install nut (B) up over the threads
until it stops against the bottom of the sink, then
hand turn (clockwise) to tighten (Fig 1).
1b
2
Push
1
up
5
A
D
E
A
B
1
Sink
Push
2
up
B
Screw
Fig 1
Sink
B
3
Sink
B