Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
Please note:
the wet or dry vacuuming function.
•
To turn off the vacuum, place the on/off switch in the O position.
WARNING! To prevent overheating and a potential fire hazard, we do not recommend
continuously using the unit for more than 40 minutes at a time.
NOTE: When the container is full and water reaches the float valve, the vacuum
will automatically stop vacuuming liquid. Drain the dirty water as shown in the
Cleaning and maintenance section to resume wet vacuuming.
Vacuum-connected power tool only
To collect dust whilst using a power tool:
If the power tool in question has a dust extractor, you can connect the end of the hose to the
power tool's outlet hole. Plug the power tool into the power tool socket.
•
To use the power tool with the vacuum, place the on/off switch in the
•
To turn off the power tool with the vacuum, place the on/off switch in the O position.
NOTE: Whenever the power tool is turned on or off, there will be a few-second
delay before the vacuum turns on or off.
•
Use the handle to carry the vacuum.
is only intended for use with a power tool and will not activate
18
EN
position.
Publicidad
