Publicidad
Idiomas disponibles
Idiomas disponibles
20
7- The MD-542 has a built-in chronometer. To
see the elapsed time since test voltage is
applied, press the key
8- Pressing the key
equipment will show the voltage effectively
applied to the element being tested.
9- To stop the test, press the key
equipment capabilities are discharged by equipment.
If the measured value is bigger than the range of the
equipment, will appear on the display the message
"OVER" and the range value will keep blinking.
Warning:
Do not touch the circuit or test leads when the led
E
.
G
during a test, the
D
. The led
`
keeps lit until the internal as well as external
`
is lit.
(501 V)
Publicidad
