MSW Motor Technics MSW-SAW 16 SCROLL Manual De Instrucciones página 26

3.4. Device use
Mounting the machine on a work bench
A workbench made from solid wood is better than one made of plywood, as interfering vibrations and
noise are more noticeable with plywood. The necessary tools and small parts for assembling the saw on a
workbench are not supplied with the saw. However, use equipment of at least the following:
First, drill holes into the seating surface and then Insert the screws. A foam rubber base for reduction of
noise is not supplied with the saw either. However, we expressly recommend that you use such a base to
keep vibration and noise to a minimum. Ideal size 400 × 240 mm.
EN
1 – Support Leg
2 – Bolt M8 (x3)
3 – Flat Washer Φ8 (x3)
4 – Rubber Pad
5 – Worktable
6 – Big Flat Washer Φ8 (x3)
7 – Nut M8 (x3)
8 – Lock Washer Φ8 (x3)